The Cisco CCNA certification is a beginner level course it benefits students with the knowledge of Cisco networking technologies like LAN, Installing, configuring and troubleshooting routers and networks on Cisco devices, TCP/IP Cisco switch technology and configuring gateway protocols, and also provides you with practical training in STP and Ether Channel.
It also covers an Enhanced Interior Gateway Routing Protocol (EIGRP); you can configure a switch, reset the switch, create VLANSs, verify VTP and accomplish other activities.
CCNA allows you to learn to use the Telnet remotely while successfully configuring the Secure Shell Protocol, or SSH. Furthermore, you can learn nuances about OSI models, IP addressing, sub netting and VLAN, etc.
1.Understanding TCP/IP |
2. The Command-Line Interface |
Converting
Between Decimal Numbers and Binary 4
Subnetting a Class A, Class B, Class C Network
Subnetting Using Binary 8
Understanding Ethernet, Cisco Devices Switches and Routers
Cables and Connections, LAN Connections
Rollover Cable to Router or Switch
Terminal Settings, Serial Cable Types
568A Versus 568B Cables
Growing the Network
LAN Network Topologies
Operating Cisco IOS Software
Configuring a Cisco Switch
Extending the LAN
|
Shortcuts for Entering Commands
Using the Tab Key to Complete Commands
Using the Question Mark for Help
Enable, History, Show, exit, disable, logout, setup Commands
VLSM
IP Subnet Zero, VLSM
Subnet for the Largest Network
Determine Network Numbers for Serial Links |
| 3. Configuring a Router |
4. EIGRP |
Configuring a Single Cisco Router
Router Modes, Entering Global Configuration
Configuring a Router Name, Configuring Passwords
Password Encryption, Interface Names
Moving Between Interfaces
Configuring a Serial Interface
Configuring a Fast Ethernet Interface
Creating a Message-of-the-Day Banner
Creating a Login Banner
Setting the Clock Time Zone
Assigning a Local Host Name to an IP Address
The no ip domain-lookup Command
The logging synchronous Command
The exec-timeout Command
Saving, Erasing Configurations
show Commands
EXEC Commands in Configuration Mode: The do Command
Routing
Static Routing, Configuring a Static Route on a Router
The permanent Keyword (Optional), Static Routes and Administrative Distance (Optional)
Configuring a Default Route on a Router, Verifying Static Routes
RIP
The ip classless Command
RIP Routing: Mandatory Commands
RIP Routing: Optional Commands
Troubleshooting RIP Issues |
Configuring Enhanced Interior Gateway Routing Protocol (EIGRP)
EIGRP Auto-Summarization, Load Balancing: variance
Bandwidth Use, Authentication
Verifying EIGRP, Troubleshooting EIGRP
Single Area OSPF
Configuring OSPF, Using Wildcard Masks with OSPF Areas
Configuring OSPF: Optional Commands
Loopback Interfaces, Router ID
DR/BDR Elections, Modifying Cost Metrics
Authentication: Simple, MD5 Encryption, Verifying OSPF Configuration
Propagating a Default Route
|
| 5. Switching |
6. The OSI Model |
• Configuring
a Switch
Help Commands, Verifying Commands
Resetting Switch Configuration
Setting Host Names, Passwords
Setting IP Addresses and Default Gateways, Interface
Descriptions, Duplex Operation and Operation
Speed
Managing the MAC Address Table, Static MAC Addresses
Switch Port Security, Sticky MAC Addresses
VLANs
Creating Static VLANs, VLAN Configuration Mode
VLAN Database Mode, Ports to VLANs, range Command
Verifying VLAN Information, Saving VLAN Configurations
Erasing VLAN Configurations
VLAN Trunking Protocol and Inter-VLAN Routing
Dynamic Trunking Protocol (DTP), Encapsulation
Type
VLAN Database Mode, Verifying VTP
|
• Why Do We Need a Network Model?
• OSI Reference Model 101
• The Layers at Which Devices Operate |
| 7.Overview of Network Protocols |
8. Working with TCP/IP |
• Network Protocol Overviews
• Transmission Control Protocol/Internet Protocol (TCP/IP)
• Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX)
• AppleTalk
• NetBEUI
• REVIEW BREAK: Protocol Overview and Comparison
|
• TCP/IP Protocols
• TCP/UDP Ports
• TCP/IP-Based Network Services
• IP Addressing
• Subnetting
• Reasons to Subnet
• Default Gateways
• Identifying the Differences Between Public and Private Networks
|
| 9.WAN Technologies |
10. Remote Access and Security Protocols |
• Router, Hub, Switches, Bridges
• WAN Protocols
|
• Remote Access Protocols and Services
• Security Protocols
• Types of Remote Access |
| 11. Network Operating Systems and Clients |
12. Securing the Network |
• Network Operating Systems
• Windows NT 4
• Windows 2000
• Novell NetWare
• Linux
• Operating System Interoperability
• Operating System Client Support
• Client Operating Systems
Fault Tolerance, Disaster Recovery, VLANs, and NAS
• Understanding Fault Tolerance
• Disaster Recovery
• VLANs
• Network Storage
Configuring Network Connectivity
• Configuring Remote Connectivity
• Selecting an NIC and Network Configuration Settings
• Configuring Clients to Access Servers
• Adding, Modifying, or Removing Network Services |
• Threats to Security
• Physical and Logical Security
• Firewalls
• Proxy Servers
• Understanding How Security Affects a Network
Troubleshooting Connectivity
• Troubleshooting Tools
• Troubleshooting in a Small Office/Home Office Environment
• Troubleshooting Remote Connectivity Errors
Troubleshooting Tools and Utilities
• Selecting the Appropriate Tool for Wiring
• Interpreting Visual Indicators
• Using Diagnostic Utilities |
|
|
